Application Information
DIRECTIONS FOR USE
USER MUST READ AND UNDERSTAND ALL INSTRUCTIONS AND PRECAUTIONS OUTLINED ON THIS LABEL AND THE CORRESPONDING SDS. FOR PROFESSIONAL USE ONLY.
HYDROBRITE ADDITIVE IS FOR USE WITH FIBERLOCK’s ADVANCED PEROXIDE CLEANER (#8314) ONLY. DO NOT MIX WITH ANY OTHER PRODUCT.
NOTE: The HydroBrite mixture should be used within 20-30 minutes to achieve the full effect of the product. Application to the substrate within 5-10 minutes is ideal. Plan your work accordingly so that you can apply all mixed product as quickly as possible. Do not return unused product to original container.
Using the enclosed 80 CC scoop, add HydroBrite to Advanced Peroxide Cleaner at the following dilution ratio and mix contents thoroughly:
1. Minimum: 1 level scoop of HydroBrite powder per gallon of Advanced Peroxide Cleaner
2. Typical: 3 Level scoops per gallon of Advanced Peroxide Cleaner
3. Maximum: 6 level scoops of HydroBrite powder per gallon of Advanced Peroxide Cleaner
Apply with a standard pump or hand trigger sprayer. Agitation with a nylon bristle brush is recommended to maximize stain removal. HydroBrite can leave a slight white powdery residue on substrates when dry. Rinse with clean
water or use a damp wipe. Allow up to 24 hours for full surface brightening to take effect.
PRECAUTIONS
HydroBrite is a high pH additive formulated to boost the performance of the Advanced Peroxide Cleaner. Always test substrate in an inconspicuous area to determine if the solution will adversely affect the target material. This product is not intended for use on soft metals as pitting and etching can occur. Will degloss painted surfaces. Do not use on fine or finished woods as HydroBrite can affect the finish of the wood. Do not use on glass. Protect floors and surrounding surfaces from contact. Promptly clean off any overspray or dripping from floors.
DANGER:
Precautionary Statements:
Prevention: Wear protective gloves/ protective clothing/eye protection/ face protection. Do not breathe fumes, dust, mist, vapors or spray. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Response: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER or doctor/physician. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Wash contaminated clothing before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Storage: Store locked up.
Properties
Product Speci cations
Active Ingredient: Sodium Carbonate
Color: White Powder
Odor: None Foaming: High Foaming Flash Point: Non-combustible pH: 12.5-13.5 Shelf Life: 3 Years Min.
(Original Sealed Containers)
Coverage (when mixed with Advanced Peroxide Cleaner)
500-1200 ft2/gal
