Fiberlock RECON Heavy Duty Cleaner

Bennett Direct :: Chemicals :: Fiberlock RECON Heavy Duty Cleaner

Fiberlock RECON Heavy Duty Cleaner

Fiberlock RECON Heavy Duty Cleaner

RECON Heavy Duty Cleaner is a very powerful, water soluble, cleaner/degreaser. Due to its chemical potency, this product is extremely effective in the removal of heavy accumulations of grease, oil, fats, carbon, ink, wax, dirt and soot, tar and asphalt, creosote, rust stains and many soils. It also contains HydroSolv 2000 technology, a fast acting powerful solubilizing agent that dissolves and suspends any soil, allowing it to be wiped or rinsed away completely.

 

 

 

DIRECTIONS

 

 

FOR LIGHT DUTY CLEANING:

Dilute 60mL of concentrate per four litres of water.

 

FOR MOP CLEANING OR MACHINE SCRUBBING OF FLOOR FINISHES OR MEDIUM DUTY CLEANING:

 

 

Dilute 90 or 120mL  of concentrate per four litres of water.

 

FOR HEAVY DUTY INDUSTRIAL CLEANING:

 

 

Dilute 180 to 240mL  of concentrate per four litres of water. Apply a liberal amount of solution onto the surface to be cleaned and allow to stand for a few minutes to allow product to penetrate into soil. Brush or scrub surface and pick-up. Rinse thoroughly with clean water.

 

FOR USE IN AUTOMATIC SCRUBBERS: For daily maintenance of non-industrial floors, dilute 90 to 120mL of concentrate (depending on soil conditions) to each four litres of water in the solution tank. For use in heavy industrial applications, dilute 240 to 350mL of concentrate (depending on soil conditions) to each four litres of water in the solution tank.

 

 

FOR USE IN PRESSURE WASHERS: Adjust spray nozzle to deliver 1 part concentrate to 30-60 parts water depending on soil conditions. Rinse thoroughly with clear water.

 

These directions are flexible rather than specific. In many cases a more dilute solution can be used, while for extreme conditions a less dilute solution may be used.

 

 

 

This product meets the maximum content requirements for Volatile Organic Compounds (VOCs) as established by State and Federal regulations.

 

 

 

CAUTION

 

 

WARNING: EYE AND SKIN IRRITANT. Avoid contact with skin, eyes, and clothing. Wear protective rubber gloves when handling. Wear protective eyewear (chemical splash goggles) where potential for mist contact may occur. Use in well ventilated areas. Avoid breathing of vapors or mists. Do not take internally. Harmful if swallowed. Keep out of the reach of children. For professional use only.

 

FIRST AID

 

 

EYE CONTACT: Flush with water while hold- ing eyelids open for at least 15 minutes. Call a physician immediately.
SKIN CONTACT: Remove contaminated clothing. Wash thoroughly with water. If irritation persists, call a physician immediately.

INGESTION: Do not induce vomiting. Im- mediately drink large quantities of water. Contact a physician.
INHALATION: Remove to fresh air. Seek medical attention if symptoms persist.

CAUTION!
KEEP OUT OF REACH OF CHILDREN.
Do not take internally. Close container after each use.
Keep from freezing.
Store between 40°F (4.5°C) and 90°F (32°C)

 


 

 

Product Specifications

Active Ingredient:                        11.5 ± 0.5%
Color:                                    
Orange

Odor:                                                 Mild

Foam:                                     Moderate

Flash Point:                                     Non-combustible

pH:                                                 12.0-13.0

Shelf Life:                                     24 Months Min.

                                                (Original Sealed Container)

Dilutions

Soot & Carbon Removal: 1:16

Heavy Duty Cleaning:             1:16

Medium Duty Cleaning:             1:32

Steam Cleaning/Pressure Wash: 1:32

General Cleaning:                         1:64

Click here to view Product Brochure

Price (Ex GST):
$134.00
Please contact us
for assistance
Special Offers
Subscribe to our newsletter
& get our latest offers delivered to your inbox!


We deliver everywhere in Australia